The car gauges on your dashboard tell you so much about your vehicle, from the current speed to when the oil is low. When one or more gauges stop working, it can keep you from operating the car efficiently or learning about a problem that requires immediate attention. If you ignore a gauge for too long, it could end up costing you a lot more money down the road. Here’s what you need to know about gauge repair.
Why Do Car Gauges Stop Working?
Car gauges can stop working for a number of reasons. A short in the wire can temporarily cause a gauge to malfunction. A blown fuse may shut down all the gauges on the dashboard. Sometimes a cable can break, such as the cable that controls the speedometer. A dead bulb may also be a culprit and keep one gauge from lighting up on the dash.
How to Fix the Gauges on Your Dashboard
It’s not always easy to fix the gauges yourself if you’re unsure about the problem. If a gauge doesn’t work, start with the most obvious causes. Check the fuses, the bulbs, and the manual for possible causes and solutions. Some problems may show up in diagnostic readers, so you might have more luck if you plug the reader into the car’s diagnostic link and check the codes. It can often lead you in the right direction.
Otherwise, you should take your car to the shop and have a professional look at the problem. If your speedometer isn’t working correctly or the fuel gauge stops working, you may find yourself pulled over for speeding or sitting on the side of the road with no gas.
Gauge Repair: Don’t Ignore the Problem
Driving with non-functioning gauges leads to unnecessary problems. Whether the Check Engine light has turned on or the airbag light goes on and off randomly, it’s important to have a professional technician inspect the dash. Kennedy Transmission provides gauge repair services to help identify problems with your vehicle and to repair them quickly and efficiently. No matter what’s causing the problem, we’ll have everything in working order before you know it.
